Machine Accessories

A versatile dust collection system that fits 2.5” and 4” dust collection systems 2.5” and 4” ports fit most dust collection systems Easy-to-use clamps make redirecting the internal tube a breeze Quick and easy to install

Designed specifically for the SawStop CNS Contractor Saw, this mobile base allows the saw to be easily moved around the shop. The fully-welded 1/4" rigid steel construction and black powder coat finish will stand the test of time and take the abuse that is often associated with mobile bases. This unit is so rugged that it supports the entire table and requires no extension piece – even for the 52" extension table. The casters are made of durable polyurethane and feature two fixed-direction wheels and two casters that swivel 360° for easy positioning. Designed for easy one foot operation. Fully-welded 1/4" rigid steel construction Supports the entire table and requires no extension piece Two fixed-direction wheels and two casters that swivel 360°

The Overarm Dust Collection Assembly provides a simple and unobtrusive way to remove dust up and out of the way by connecting directly to SawStop’s dust-collection blade guard. This unit is compatible with ALL SawStop cast iron saws and fits ALL SawStop T-Glide Fence Rail Systems. Purchase a Dust Collection Panel (#842962) to unite above- and below-table dust collection into one 4" port.

Designed to fit your SawStop 27″ deep cast iron router tables. Compatible with various routing accessories like feather boards, flip stops and more Dust port: 2.25″ diameter This fence assembly features two adjustable faces with shims and adjustable scales

This 27″ cast iron table is built to fit either the SawStop Benchtop Stand or be installed in-line between SawStop TGP2 series table saw rails. Maximize your shop space with the in-line installation Delivers a precision experience complemented by SawStop’s line of RT products Precision ground to .0118” Router plate opening: 11 3/4″ x 9 1/4″

This 30″ cast iron table is built to be installed in-line between SawStop TGI2 series table saw rails. Maximize your shop space with the in-line installation Delivers a precision experience complemented by SawStop’s line of RT products Precision ground to .0118” Router plate opening: 11 3/4″ x 9 1/4″

Designed to fit your SawStop 30″ and 32″ wide router tables. Compatible with various routing accessories like feather boards, flip stops and more Dust port: 2.25″ diameter This fence assembly features two adjustable faces with shims, external rails and adjustable scales

This massive 32″ x 24″ cast iron table is built to fit the SawStop RT-STF Floor Stand. Delivers a highly-precise experience for industrial-grade results Precision ground to .0118” Router plate opening: 11 3/4″ x 9 1/4″

These phenolic inserts are graduated in size for quick-change versatility. Ultra-strong phenolic core material to reduce tear out and chip out Pre-formed sizes include: 0.25″, 0.5″, 1.5″ and 2.5″ Four-point, cam-style lock to ensure a secure lockdown Machined to precisely fit the SawStop RT-LFT Router Lift

These solid phenolic inserts can be cut to deliver exact results for each of your favorite bits. Ultra-strong phenolic core material to reduce tear out and chip out Four-point, cam-style lock to ensure a secure lockdown Machined to precisely fit the SawStop RT-LFT Router Lift

Compatible with most routers, this set supports general routing, dovetailing, and more. Includes a custom-fit phenolic insert, eight guides (1 19/64″, 5/8″, 27/32″, 17/32″, 17/64″, 9/32″, 11/32″, 13/32″) and 1 lock nut. Includes 8 template guides for various routing applications: 1 19/64”, 5/8”, 27/32”, 17/32”, 17/64”, 9/32”, 11/32”, 13/32” Includes 1 locking nut Includes 1 3/8” Insert Ring Designed to fit most routers

Cast Iron Table Insert For 36″ PCS RT (Filler Table To Complete A PCS 36″ Set Up)

TWO CAST IRON WINGS

CNS Cast Iron Extension Wing

DOWNDRAFT DUST COLLECTION BOX FOR ROUTER TABLES

FOLDING OUTFEED TABLE

Industrial Series 36″ Extension Table Assembly I

JSS Dado Table Saw Insert For 8 In Dado Sets

Power Switch For In-Line Router Tables

27'' IN-LINE CAST IRON ROUTER TABLE FOR PCS & CNS

Pair the Overarm Dust Collection with the SawStop Dust Collection Blade Guard for easy, reliable dust management that captures 99% of dust. Rubberized collar easily fits your DC Guard, and routes dust past the end of your extension table before joining your saw’s 4” collection port for extraction.

Sawstop Industrial Saw Mobile Base MB-IND-000

LARGE SLIDING TABLE TSA-SA70 Engineered for the demands of the Industrial woodshop, the Large Format Sliding Table ensures easy, repeatable operation. Cut sheet goods and larger stock easily, with maximum control and sure measurement. A rigid steel frame and 14 sealed, steel bearings ensure a reliable, smooth glide, and maximum adjustability affords both traditional and Euro configurations for a max crosscut of 70 inches.

Engineered and finished to fit your SawStop Contractor, Professional Cabinet or Industrial Cabinet Saw, the Sliding Crosscut Table is the finest quality crosscut table available. It delivers repeatable, accurate results with ease and beauty. • This sliding table is built for versatility. Micro-adjust for detail cuts, and crosscut full sheets with the 55″ travel and 48″ crosscut capacity. • The fence is at least 15% larger than typical crosscut sliders, spanning 43″ and extending past 58″. The oversize fence miter turns at the twist of a single knob, and measures to a full 60 degrees. • Adjust the table to fit your needs. Easily slide the fence in for blade proximity, and choose a flush or “maximum throw” installation to fit your shop and space requirements. • Large flip-stops with scale and magnified lenses help ensure accurate, repeatable cuts every time.

Enjoy the best of precision routing at this beautiful 32″ x 24″ cast iron standalone router table, featuring a fence assembly with two adjustable faces with shims, a 2.25″ dust port, adjustable scales and combability with various routing accessories like feather boards, flip stops and more. The powder coated tubular steel stand includes integrated wheels, adjustable feet for optimum leveling, and a power switch for easy remote router control. - Router table opening: 11 3/4″ x 9 1/4″ - 32″ fence assembly dimensions: 35 3/4″L x 3 1/2″H x 4″W - Max fence travel: 5 1/2″

Standard Table Saw Insert With Lock-Down Lever (10″ Blades)

Schmalz Column Mounted Jib Crane With VacuMaster Basic

Designed to fit SawStop RT fence miter slots, this vertical feather board provides downward pressure to keep your workpiece in position and help prevent kickback.

T-Glide Extension Table Assembly – 36 inch Professional Series II

30'' In-Line Cast Iron Router Table For ICS (INCLUDED IN BOX: RT-F32, RT-PSW, RT-ST2, RT-C30)

Pro Cabinet Saw Integrated Mobile Base

Industrial Mobile Base w/ PCS- Conversion Kit

For Use with Saw Type(s): CB, ICS, PCS and CNS Model Saws

Dust Collection Blade Guard Upgrade your SawStop Contractor Saw or 1.75HP Professional Cabinet Saw with above-table dust collection. Collect the majority of above-table dust with this handy, easy to assemble and mount accessory. The independent lateral slides minimize blade exposure, while the low profile allows for cuts as narrow as 3/4". The dust port attaches directly to customer’s dust-collection system and is compatible with SawStop Overarm Dust Collection Assembly. Not compatible with Jobsite Saw PRO. Independent lateral slides minimize blade exposure Low profile allows for cuts as narrow as 3/4 For SawStop Contractor Saw or 1.75 HP Professional Cabinet Saw upgrades Also used as a replacement Dust Collection Blade Guard for SawStop 3HP Professional Cabinet Saw

Dado Table Saw Insert w/ Lock-Down Lever for 8 in dado

Standard Table Saw Insert w/ Lock-Down Lever

Table Saw Brake Cartridge TSBC-10R3

This 16” jointer/planer combo machine offers power and precision in a compact size for any shop. With long jointer tables, and sturdy fence, this machine is a quality product, made in Italy, for a value price. Find out why this machine may be perfect for you. – 4.8 Horsepower single-phase motor – 16″ Jointer/planer cutterblock – 70″ Jointer table length – Precision-ground cast iron tables – American-style jointer guard – Quick-tilting jointer fence – Jointer tables open away from the operator – Two independent dust collection ports – Tool set & owner’s manual Depending on the desired cutterhead, the Minimax FS 41C also comes with: – 3-knife “Tersa” quick-change cutterhead – Xylent helical cutterhead ** The Minimax FS 41C comes with an American-style spring-loaded jointer guard and does not come with the pictured European guard in the attached pictures **