Tools & Supplies

For Use with Saw Type(s): CB, ICS, PCS and CNS Model Saws

GRAFLOSCONCA ULTRA Spray400 ml Article-No: 081215 Adhesive lubricant containing graphite GRAFLOSCON CA ULTRA SPRAY is a solvent-containing mineral oil base adhesive lubricant with a high content of solid particles (fine graphite) applied by spray can. It contains an Al complex soap, can carry extreme loads and has good anticorrosion properties. It does not contain bitumen, heavy metals or chlorine. The propellant is free from CFC.

A versatile dust collection system that fits 2.5” and 4” dust collection systems 2.5” and 4” ports fit most dust collection systems Easy-to-use clamps make redirecting the internal tube a breeze Quick and easy to install

Designed to fit your SawStop 27″ deep cast iron router tables. Compatible with various routing accessories like feather boards, flip stops and more Dust port: 2.25″ diameter This fence assembly features two adjustable faces with shims and adjustable scales

This 27″ cast iron table is built to fit either the SawStop Benchtop Stand or be installed in-line between SawStop TGP2 series table saw rails. Maximize your shop space with the in-line installation Delivers a precision experience complemented by SawStop’s line of RT products Precision ground to .0118” Router plate opening: 11 3/4″ x 9 1/4″

This 30″ cast iron table is built to be installed in-line between SawStop TGI2 series table saw rails. Maximize your shop space with the in-line installation Delivers a precision experience complemented by SawStop’s line of RT products Precision ground to .0118” Router plate opening: 11 3/4″ x 9 1/4″

Designed to fit your SawStop 30″ and 32″ wide router tables. Compatible with various routing accessories like feather boards, flip stops and more Dust port: 2.25″ diameter This fence assembly features two adjustable faces with shims, external rails and adjustable scales

This massive 32″ x 24″ cast iron table is built to fit the SawStop RT-STF Floor Stand. Delivers a highly-precise experience for industrial-grade results Precision ground to .0118” Router plate opening: 11 3/4″ x 9 1/4″

These phenolic inserts are graduated in size for quick-change versatility. Ultra-strong phenolic core material to reduce tear out and chip out Pre-formed sizes include: 0.25″, 0.5″, 1.5″ and 2.5″ Four-point, cam-style lock to ensure a secure lockdown Machined to precisely fit the SawStop RT-LFT Router Lift

These solid phenolic inserts can be cut to deliver exact results for each of your favorite bits. Ultra-strong phenolic core material to reduce tear out and chip out Four-point, cam-style lock to ensure a secure lockdown Machined to precisely fit the SawStop RT-LFT Router Lift

High quality heat treated steel Expansion slots help reduce vibration, noise and heat buildup Precision balanced ATB, 5/8” arbor, 3mm kerf, Rake angle 15°, Top angle 10°, Plate thickness 2mm, Tooth Thickness 0.079”

True-To Size Cuts: 24-Tooth main blades and flat-grind chippers provide cleaner cuts Extended Cutting Range: A variety of chipper widths provides maximum flexibility Cleaner Cuts: -5° hook means less tear out for cleaner cuts 8″, 5/8” arbor, 24-tooth main blades, 5 chippers, 6 shims, 1/4″ to 29/32″ cutting range, -5° hook angle, 6000 maximum RPM

Compatible with most routers, this set supports general routing, dovetailing, and more. Includes a custom-fit phenolic insert, eight guides (1 19/64″, 5/8″, 27/32″, 17/32″, 17/64″, 9/32″, 11/32″, 13/32″) and 1 lock nut. Includes 8 template guides for various routing applications: 1 19/64”, 5/8”, 27/32”, 17/32”, 17/64”, 9/32”, 11/32”, 13/32” Includes 1 locking nut Includes 1 3/8” Insert Ring Designed to fit most routers

• Amana Tool EZ Dial Scoring Set • Shim Free & Adjustable • Carbide Tipped • Fully Adjustable in increment of .1mm • Kerf Adjusts from 2.8mm-3.6mm • Fits on all SCM Sliding Table Saws

Cast Iron Table Insert For 36″ PCS RT (Filler Table To Complete A PCS 36″ Set Up)

TWO CAST IRON WINGS

CNS Cast Iron Extension Wing

DOWNDRAFT DUST COLLECTION BOX FOR ROUTER TABLES

FOLDING OUTFEED TABLE

HSK-F 63 Tool Holders manufactured of high quality steel that is polished for corrosion resistance. The tool holder (collet chuck) comes with a ball-bearing collet nut that provides more even clamping force as well as the ability to be used for either clockwise or counterclockwise rotating tools. Made in Germany and balanced to G2.5 – Ball Bearing Collet Nut Included. In stock in 3 popular styles, for ER32, ER40 and RDO35 / SYOZ 25 style collets. Common Standards for a wide range of CNC Machining Centers such as Busellato, Homag, IMA, SCM, Felder (Format4), Weeke, Haas and others.

Make tool setup a snap! Tool setup fixtures clamp HSK of ISO tool holders for accurate tool set-up and makes awkward tool handling a thing of the past. When firmly secured to a work bench, the set up fixture accepts the tool holder and offers a safe and effective way to check and tighten the tool into the tool holder using a torque wrench. This insures secure tool assembly without over-tightening the collet nut. A ball bearing in the setup fixture locks the toolholder in position so the collet nut can be tightened without movement. Proper setup eliminates test cuts as well as wasted time and material.

Balanced to 25,000 RPM at G2.5 0.0001″ runout from taper to pocket PowerCOAT nut included for 75% more clamping power HSK 63F x ER40 – 75mm D: 63mm A: 75mm F: 26mm N: 63mm Nut: 46140 Wrench: 04617 Flats: 46

Industrial Series 36″ Extension Table Assembly I

JSS Dado Table Saw Insert For 8 In Dado Sets

Power Switch For In-Line Router Tables

27'' IN-LINE CAST IRON ROUTER TABLE FOR PCS & CNS

Titanium Series 40-Tooth Combination Blade

Pair the Overarm Dust Collection with the SawStop Dust Collection Blade Guard for easy, reliable dust management that captures 99% of dust. Rubberized collar easily fits your DC Guard, and routes dust past the end of your extension table before joining your saw’s 4” collection port for extraction.

Sawstop Industrial Saw Mobile Base MB-IND-000

LARGE SLIDING TABLE TSA-SA70 Engineered for the demands of the Industrial woodshop, the Large Format Sliding Table ensures easy, repeatable operation. Cut sheet goods and larger stock easily, with maximum control and sure measurement. A rigid steel frame and 14 sealed, steel bearings ensure a reliable, smooth glide, and maximum adjustability affords both traditional and Euro configurations for a max crosscut of 70 inches.

80T Titanium Series Premium Saw Blade – 80 Tooth, High ATB, Plywood Blade

Engineered and finished to fit your SawStop Contractor, Professional Cabinet or Industrial Cabinet Saw, the Sliding Crosscut Table is the finest quality crosscut table available. It delivers repeatable, accurate results with ease and beauty. • This sliding table is built for versatility. Micro-adjust for detail cuts, and crosscut full sheets with the 55″ travel and 48″ crosscut capacity. • The fence is at least 15% larger than typical crosscut sliders, spanning 43″ and extending past 58″. The oversize fence miter turns at the twist of a single knob, and measures to a full 60 degrees. • Adjust the table to fit your needs. Easily slide the fence in for blade proximity, and choose a flush or “maximum throw” installation to fit your shop and space requirements. • Large flip-stops with scale and magnified lenses help ensure accurate, repeatable cuts every time.

Enjoy the best of precision routing at this beautiful 32″ x 24″ cast iron standalone router table, featuring a fence assembly with two adjustable faces with shims, a 2.25″ dust port, adjustable scales and combability with various routing accessories like feather boards, flip stops and more. The powder coated tubular steel stand includes integrated wheels, adjustable feet for optimum leveling, and a power switch for easy remote router control. - Router table opening: 11 3/4″ x 9 1/4″ - 32″ fence assembly dimensions: 35 3/4″L x 3 1/2″H x 4″W - Max fence travel: 5 1/2″

Standard Table Saw Insert With Lock-Down Lever (10″ Blades)

Schmalz Column Mounted Jib Crane With VacuMaster Basic

SENSOR PHOTOCELL 24V AC/DC

Designed to fit SawStop RT fence miter slots, this vertical feather board provides downward pressure to keep your workpiece in position and help prevent kickback.

T-Glide Extension Table Assembly – 36 inch Professional Series II

Factory recommended EP grease for SCM edgebanders For use on the feed track Comparable to Agip GR-MUEP-1