All Products

The Minimax FS 41ES is a professional grade, heavy-duty, long bed jointer/planer combination machine designed to meet the needs of the most demanding environments. It features cast iron tables, tilting fence, four-post planner pillar, and quick changeover. This technology gives an exacting finish while reducing ambient noise decibel output significantly. – 10 Horsepower motor – Additional overturning fence for processing of thin workpieces – Cast Iron mortiser with 120mm exhaust hood complete with 16mm chuck Strokes (X-160mm), (Y-120mm) and (Z-105mm) – Dedicated Surface Planer fence (1200mm x 150mm) – Digital-mechanical readout on planer height (1/10mm) – Parallelogram jointer tables – 4 dust-protected planer table columns with trapezoidal threading – Helicoidal thicknesser infeed roller – Sandblasted steel thicknesser outfeed roller – Pre-setting for mortiser – LED readouts & powered movements – American-style jointer guard – Wheels for machine movement – XYLENT Technology Helicoidal Cutterhead with 66 knives – XYLENT Maintenance kit with 10 additional knife inserts (15mm x 15mm x 2.5mm) ** The Minimax FS 41ES comes with an American-style spring-loaded jointer guard and does not come with the pictured European guard in the attached pictures *

The electro mechanical cabinet clamp action e is the solution for the assembly of cabinets. Intuitive and easy to use. This semiautomatic machine is suitable for all cabinet manufacturers, with low productive volumes (up to 30 cabinets/shift).

The electro mechanical cabinet clamp action p is the solution for the assembly of cabinets. The automatic set-up allows to a simple use of the clamp. This automatic machine is suitable for all cabinet manufacturers, with medium productive volumes (up to 50 cabinets/shift).

Main configurations: 160 tons of three-layer hot press technical parameters: Hot plate size: 2500✘1300mm height 100mm*42mm Nominal pressure: 160 tons Number of hot plates: 3 sheets Spacing between layers: 100mm Hydraulic station power: 7kw Heating power: 36kw Hydraulic oil model: Heat transfer oil temperature: 180-200°C Equipment weight: about 8 tons Size: width 1700✘ length 3800✘2200 (height) mm

Brand Ambition 1100 Edgebander Stations Include: Pre-Mill Gluing End Trim Top & Bottom Scrape & Buff In good running condition and still in use under power

The Class TF 130PS is the workhorse of the SCM shaper line. It has a very robust structure and all the controls can be accessed on the front of the machine for easy use. An integrated sliding table further increases the flexibility of this machine. A mechanical digital reader ensures the precision of the spindle adjustment. 3ph/ 220V 11HP fixed 1 1/4 MK5 interchangeable spindle 5-speed Aluminum fence w/ mechanical adjustment Sliding table Tenoning kit

A must for the serious woodworker, the Class TF 130 is the SCM shaper that combines quality and value for your investment. It has a very robust structure and all the controls can be accessed on the front of the machine for easy use. A mechanical digital readout ensures the precision of the spindle adjustment. 3ph /220V 11 HP Fixed 1 1/4 " MK 5 interchangeable spindle 5-speed aluminum fence w/ mechanical adjustments

The Class TI 120 is one of SCM Groups finest manual tilting spindle shapers. The tilting spindle allows craftsmen to use more creativity in designing high-end, custom products. The quality and flexibility of this machine are especially appealing to architectural millwork operations.

10 HP, 5000 CFM The SHK Series enclosureless dust collector is designed for the collection of sawdust and is ideal for indoor use in smaller wood shops, or for more localized extraction dedicated to specific woodworking machinery. The optional mechanical shaker cleaning system increases production time by reducing labor required to maintain filter efficiency. The bags can be mechanically shaken after the fan is switched off (per NFPA guidelines). The filter housing supports anti-static polyester filter sleeves fixed by double snap rings into a tube sheet, which is mounted atop the material collection hopper that empties the collected material into plastic bags. The collector frame is made of durable 14 GA galvanized sheet steel. The material handling fan is rated for S1 duty cycle (continuous running), and features a high-efficiency IP55 motor. The SHK Series collector is available with several waste discharge options: Hopper and waste bags (standard, as shown). Haul-away forklift dump bin. Waste barrels with viewing windows. Collection hopper with rotary screw extractor and rotary air lock (leg extensions available for additional clearance below discharge). Closed-loop material transfer system including rotary screw extractor, rotary air lock, material transfer fan and material transfer ductwork. Enclosure panels are available for locating SHK Series units outdoors. All SHK Series units are capable of retrofit for locating outdoors. Additional safety equipment is available for spark detection & extinguishing, deflagration relief & containment, and abort for return air applications.

7.5 HP, 3600 CFM The SHK Series enclosureless dust collector is designed for the collection of sawdust and is ideal for indoor use in smaller wood shops, or for more localized extraction dedicated to specific woodworking machinery. The optional mechanical shaker cleaning system increases production time by reducing labor required to maintain filter efficiency. The bags can be mechanically shaken after the fan is switched off (per NFPA guidelines). The filter housing supports anti-static polyester filter sleeves fixed by double snap rings into a tube sheet, which is mounted atop the material collection hopper that empties the collected material into plastic bags. The collector frame is made of durable 14 GA galvanized sheet steel. The material handling fan is rated for S1 duty cycle (continuous running), and features a high-efficiency IP55 motor. The SHK Series collector is available with several waste discharge options: Hopper and waste bags (standard, as shown). Haul-away forklift dump bin. Waste barrels with viewing windows. Collection hopper with rotary screw extractor and rotary air lock (leg extensions available for additional clearance below discharge). Closed-loop material transfer system including rotary screw extractor, rotary air lock, material transfer fan and material transfer ductwork. Enclosure panels are available for locating SHK Series units outdoors. All SHK Series units are capable of retrofit for locating outdoors. Additional safety equipment is available for spark detection & extinguishing, deflagration relief & containment, and abort for return air applications.

About this machine: 37″ Wide machine Combination head with 4.75″ diameter, 85 shore rubber contact drum and 2″ wide platen 18 HP main motor for sanding unit 0.7 HP, 2-speed feed motor (15 and 30 FPM) 6.25″ Maximum workpiece thickness Uses 37″ x 60″ abrasive belts Accurate and reliable electronic tracking of abrasive belt Pneumatic belt tensioning with center fulcrum to compensate for tapering of abrasive belt Powered table positioning with electronic digital readout Automatic thickness setting device Rubber coated pressure rolls before and after sanding unit Infeed and outfeed tables with (2) rollers each 50 Shore negative profile (waffle pattern) rubber feed mat Automatic emergency stop of machine for: Sanding belt breaking, tensioning, overtracking; Absence of compressed air; overload on main motor (2) Platens provided – (1) Rigid, (1) Soft Air requirements: 6 Bar (88 PSI) Dust requirements: 900 CFM Electrical requirements: 54 Amps @ 230 V, 3 Phase

About The Machine: • 37″ Wide machine • Combination head with 4.75″ diameter, 85 shore rubber contact drum and 2″ wide platen • 18 HP main motor for sanding unit • 0.7 HP, 2-speed feed motor (15 and 30 FPM) • 6.25″ Maximum workpiece thickness • Uses 37″ x 60″ abrasive belts • Accurate and reliable electronic tracking of abrasive belt • Pneumatic belt tensioning with center fulcrum to compensate for tapering of abrasive belt • Powered table positioning with electronic digital readout • Automatic thickness setting device • Rubber coated pressure rolls before and after sanding unit • Infeed and outfeed tables with (2) rollers each • 50 Shore negative profile (waffle pattern) rubber feed mat • Automatic emergency stop of machine for: Sanding belt breaking, tensioning, overtracking; Absence of compressed air; overload on main motor • (2) Platens provided – (1) Rigid, (1) Soft • Air requirements: 6 Bar (88 PSI) • Dust requirements: 900 CFM • Electrical requirements: 54 Amps @ 230 V, 3 Phase

Machine Specs: • Worktable Dimension: 600mm x 885mm • Cast Iron Saw Wheels Diameter: 640mm • Saw Wheel Width: 38mm • Maximum Cutting Height: 600mm (24″) • Maximum Cutting Width: 620mm • Worktable Tilting (CE): 0° – 45° (20°) • Exhaust Outlet Diameter: N° 2mm x 120mm • Voltage: 220V 1-phase, 4.8hp, 25.2″ flywheels dia. , 23.6″ resaw height, 24.4″ cutting width, 204″ recommended blade length, .25″ – 1.5″ blade

Technical Specifications Worktable dimensions: 600 x 885 mm Diameter of cast iron saw wheels: 640 mm Saw wheels width: 38 mm Max. cutting height: 600 mm / 24″ Max. cutting width: 620 mm / 25″ Tilt of worktable: 0° / 20° Min./max. saw blade dimensions: 8 mm / 35 mm Standard single-phase motor S1 220V: 2.2kW (3hp) 50Hz Standard three-phase motor S1 400V 50Hz: 3kW (4hp) 50Hz Exhaust outlet diameter: 2 x 120mm 3-phase, 9hp, 25.2″ flywheels dia., 23.6″ resaw height, 24.4″ cutting width, 204″ recommended blade length, .25″ – 1.5″ blade widt

Technical Specifications Motor 3-phase 230v 6.6Hp Flywheel Diameter 29” (740mm) Table Size 28.34” x 39.37” (720x 1000mm) Table Tilt 0° -45 Cutting Height/Depth 17.7” (450mm) Cutting Width 28.34” (720mm) Min Blade Length 210.23” (5340mm) Max Blade Length 213.38” (5420mm) Overall Dimensions(Used Upright/Vertically) 46.4” x 28.3” x 104.3” (118x 72x 265cm) Net Weight 992lbs (450 kg) Total Dust Extraction Ports: 2 Total Dust Extraction Ports Diameter4.72” (120mm) 3-phase, 6.6hp, 29″ flywheel dia., 17.7″ resaw height, 28.34″ cutting width, 212″ recommended blade length, .31″ – 1.5″ blade width

Technical Specifications Motor 3-phase 230v Horsepower 9Hp Flywheel Diameter37” (940mm) Table Size32.28” x 45.66” (820x 1160mm) Table Tilt0° -45°Cutting Height/Depth22” (560mm)Cutting Width36.2” (920mm) MinBlade Length259.44” (6590mm) Max Blade Length264.17” (6710mm) Overall Dimensions(Used Upright/Vertically)61” x 36.2” x 112.59” (155x 92x 286cm) Net Weight1,584 lbs.(720kg) Total Dust Extraction Ports2 Total Dust Extraction Ports Diameter5.5” (140mm)

The Holz 10HP Dust Collector • 9 3/4″ inlet • Magnetic Starter • CFM 4,100 • 220v, 3 phase • Aluminum fan • Casters • 4 upper/lower bags • Square Design

Holz 4 hp dust collector: • 3 kw • 5 ¾” inlet • 1,750 CFM • Magnetic starter • 220v, 3 phase • Aluminum fan • Casters • 2 upper/ lower bags

10′ Sliding table saw Heavy Duty Construction 126″ max length of cross cut 50″ rip capacity 7.5 hp main motor 1hp scoring motor 14″ blade capacity 30mm arbor Motorized Height adjustment of the main blade Manual Tilting arbor from 0 to 45 degrees Overarm dust collection included Heavy Industrial Aluminum cross cut fence with two flip stops 220v, 3 phase 60hz

Holz Heavy Duty 24″ Planer Max Width 630mm Max Thickness 300mm Feed Speed 8, 10, 12 m/min Spindle Speed 4800 rpm Blades 4 straight knife Motor 10hp, 220v 3 phase Weight 1380 lbs

Holz Paoloni Fixed Spindle Shaper Main spindle speed r/min 1300/2500/3500/5000/6000/8500 Spindle diameter 1 1/4″ Max height 5.9″ Table size 1200×700 mm Main Motor 5.5hp Overall dimensions 1200×800×1240 mm Net weight 838 lbs

Platen dimensions 3,200 x 1,600 mm (126 x 63 in.) Number of daylights 1 Total cylinder stroke 400 mm (15 3⁄4 in.) Number of pressing cylinders 8 Cylinder diameter 70 mm Total thrust 120 metric tons (264,554) Max. laminating pressure on 80% of platen area 2.94 kg/cm2 (41 psi) Hydraulic pump 2.1 kw (2.8 hp) Boiler power 18 kw Maximum platen temperature 120o C (248o F)

DC-650 1HP DUST COLLECTOR WITH 30 MICRON FILTER BAGS. JET Model 650 dust collectors hook up to 1 to 3 machines at a time for optimum dust cleaning. Each 650 series dust collector comes equipped with a quick-install collection bag, single-stage design for economical and quiet operation, 4 casters for maneuverability and total portability, and permanently lubricated, fully enclosed, fan-cooled motors for continuous duty. An optional remote control is radio frequency so there is no need for line of sight to turn the machine on and off. STYLE (TYPE) BAG • 1-HOSE CONNECTION DIAMETER (IN.) 4 • EFFICIENCY (MICRON) 30 • FILTER BAG/CANISTER LENGTH (IN.) 25 • COLLECTION BAG CAPACITY (CU. FT.) 2-1/10

The advantages of an exclusive choice. Buying a “L’invincibile six” machine means you get a customized solution, thanks to experience, technical research and Italian creativity. Console eye-S main functions: – connectivity among machines belonging to the same company network and 4.0 Industry preset – sharing of work programs and tools database – activity monitoring and reporting on the use of the machine – connectivity with SCM Thundercut (optimizer/sequencer App) – self-diagnosis, tele-service and link to troubleshooting

Technical data Max. useful spindle length 140 / 5.5 mm / inches Spindle speed 3000/4500/6000/7000/10000 rpm Max. diameter of the profiling tool 250 / 9.8 mm / inches Max. tool diameter retractable under the table at 90° 320 / 12.6 mm / inches Max. diameter of the tenoning tool 300 / 11.8 mm / inches Three-phase motor power 10 Hp

Technical data Max. useful spindle length 140 / 5.5 mm / inches Spindle speed 900 – 12000 rpm Max. diameter of the profiling tool 250 / 10 mm / inches Max. tool diameter retractable under the table at 90° 300 / 11.8 mm / inches Max. diameter of the tenoning tool 300 / 11.8 mm / inches Three-phase motor power 13 Hp

Maggi radial arm saws offer adaptability, versatility, precision and durability to shops of all sizes. Maggi has been producing radial arm saws since 1973 and over the years has continually improved technical design and quality. Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. European quality made to last! 4 HP, 2800 RPM motor 400 mm (15.75") Blade diameter capacity (Not included) 30 mm Arbor diameter 73.23" x 45.08" Table size 27.75" Max crosscut length on 3/4" thick material (90 deg) 0 to 40.5" Rip capacity 4.9" Max depth of cut 19.68" Max cut length at 45 deg on right side 12.20" Max cut length at 45 deg on left side Dust chute on blade guard as well as rear of table Machine weight: 495 Lbs. Machine dimensions: 73" x 62" x 61" T Crated dimensions: 56" x 34" x 24" T Crated weight: 523 Lbs. Voltage: 230V 3-Phase

The Maggi System 29 Boring Machine provides a 29 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with locking points from 0 to 90 degrees for quick set-up at any angle. Accurate positioning of the boring unit to the table with digital readout 0 to 2.5″ adjustable drilling depth with patented spiral setting device (3) patented quick release material clamps with auto-setting to firmly hold material to table Powerful 2 HP motor 47″ x 13″ cast iron table Side fences with mechanical digital readout for quick and accurate setting 120″ back fence with (2) stops – Maximum stroke 300 mm (12″) Fixed stop at 37 mm for hinges Foot actuated pneumatic clamps and drill cycle Uses 14 LH (red) and 15 RH (black) boring bits Includes: Magnetic Starter with overload protection and (29) quick change chucks Dust Outlet: 3″ Net weight: 705 lbs Dimensions: 59.3″ x 37.8″ x 50″ Tall Crated Dimensions: 59.8″ x 37.4″ x 40.5″ Tall Crated Weight: 815 lbs.

• (2) 23-Spindle heads on 32 mm centers • Distance between first and last spindle center of each head is 27-23/32″ (704 mm) • Front end adjustment for quick and easy set-up • (2) 2 HP 3,500 RPM motors • Max. boring depth is 2-1/16″ (55 mm) • Side depth counter system • Extractable 400 mm support rollers for long panels • Maximum distance between heads is 25-19/32″ (650 mm) • Minimum width is 5-1/8″ (130 mm) • Distance from fence to first head is 15 mm min. to 494 mm max. • Distance from fence to second head is 160 mm to 639 mm max. • Complete with: 46 quick change chucks, 10′ extension fence with (4) flip-stops and (2) pneumatic reference pins • (6) Patented safety clamps • This machine can be used for single or double row line drilling • Uses 24 LH (red) and 22 RH (black) boring bits • Working air pressure 94 psi • Net weight: 820 lbs • Crated weight: 940 lbs

Further enhanced compared to its predecessor with the new end cutting-rounding unit. This new unit allows further processing, saving a substantial amount of time with an ease of processing. This technological solution is unique in its category, where such operations are normally a feature of more expensive and higher level machinery. Technical Data 1ph 10" EYE-S touch screen control Units: Dual pre-mil combined End trim and Corner rounding Top/bottom trim • Work table dimensions mm 3000 x 525 • Min. ÷ max. thickness of rolled edges mm 0,4 ÷ 3 • Max. thickness of edges in strips mm 5 • Min. ÷ max. panel height mm 8 ÷ 50 • Min. panel length/width mm 190/110 • Min. panel length/width with end cutting/rounding unit mm 120/110

Technical data Minimax AD 21 Max. panel width 833 / 32.75 mm / inches Worktable dimensions 905 x 372 / 35.6 x 14.6 mm / inches Worktable height 900 / 35.5 mm / inches Max. tool diameter 40 / 1.57 mm / inches Min. – max. panel height 10 – 85 / .375 – 3.25 mm / inches Spindle speed 2800 rpm # of Spindles 21 # Spindle Spacing (center-to-center) 32 mm

Technical data Longitudinal stroke mm 200 Vertical stroke mm 160 Transversal stroke mm 125 Tool spindle diameter mm 1÷16 Spindle speed rpm 3000 Three-phase motor starting from kW/Hz 1,5 (1,8) / 50 (60)

Universal combined machine with all minimax quality, at the most affordable price, ideal for demanding hobbyists and crafts woodworking workshops. A universal combination machine with all of the Minimax quality at a more affordable price, ideal for the D.I.Y. woodworkers and the small joinery workshops. The most compact 4-in-1 combination machine available, the Minimax C 26G is ideal for the hobbyist who works primarily with solid wood and is looking for a better alternative to tools like a jobsite saw, benchtop lunchbox jointer, benchtop planer, and router table. The Minimax C 26G comes standard with 2.5hp motors, 10″ sawblade capacity, 2-speed shaper, 10” Tersa jointer/planer cutterhead, and mobility kit. – 4′ Sliding table saw with 10″ main blade – 3x 2.5 Horsepower single-phase motors – 10” Jointer/Planer cutterhead with Tersa knives – Anodized aluminum sliding table with hardened steel ways – Eccentric workpiece clamp – Adjustable and removable riving knife – Outrigger/Squaring frame included (not pictured) – Tool set and operator’s manual

Machine Specs: • Cutterhead Working Width: 300mm (13") • Jointer Bed Length: 1200mm (47") • Maximum Sawblade Diameter: 250mm (10") • Sawblade Arbor Size: 16mm (5/8") • Cutting Width on Parallel Fence (Rip Capacity): 540mm (21") • Spindle Molder Speed: 4000 RPM/6500 RPM

The Minimax CU 410ES is a heavy duty, 3-phase, five function full combination machine designed to meet the needs of the most demanding environments. It features cast iron tables, tilting fence and breakthrough XYLENT technology. This technology gives an exacting finish while reducing ambient noise decibel output significantly. – 8 Horsepower motor, 3-phase 230v – Digital-mechanical readout on planer height and shaper spindle height – LED readouts & powered movements – Wheels for machine movement – XYLENT Technology Silent Cutterhead with 66 knives – XYLENT Maintenance kit with 10 additional knife inserts – Magnetic starter with overload protection – Automatic self-braking motors – Planer has four dust protected jackscrew posts for lifting of planer table – Elite cast-iron mortiser – On/Off pushbuttons for saw, planer and shaper motors on operator side – Dial indicators for shaper and saw tilt – Separate scoring motor with external scoring blade adjustments – Double trunnions on the saw and shaper supports – ¾” dado capacity – Pre-wired powerfeeder swing arm support – Rubber coated outfeed roller – Rear tilting Interchangeable shaper spindle: 1.25” standard – 3-axis, micro-adjustable shaper fence system, with memory pins and digital readout – 8.5ft aluminum sliding table with precision guideways – Cast-iron horizontal mortiser and American-style jointer guard – Short crosscut fence with mitre gauge, eccentric workpiece clamp and trimming shoe

The Minimax CU 410E is the go-to machine for woodworkers wanting a wider jointer to process larger pieces. This full combination machine has a 16” jointer/planer incorporated into it. A large sliding table to process longer sheet goods is standard, and a tilting arbor shaper is also included. This machine is heavy-duty, but is still able to be broken down to save space in a small shop. STANDARD FEATURES – Three independent 4.8 horsepower motors, single-phase 230v – Double trunnions on both saw and shaper assemblies – Interchangeable spindle shaper: 1.25” standard – Three-axis, micro-adjustable shaper fence system – Interchangeable and spare spindle – Digital-mechanical (NON-LED) readout on planer height, shaper spindle tilt and height, saw tilt. – Automatic self-braking motor – 8.5ft aluminum sliding table with precision guideways – Cast-iron horizontal mortiser – Short crosscut fence with mitre gauge, eccentric workpiece clamp and trimming shoe – 4-knife “Tersa” jointer/planer cutterhead – American-style jointer guard – Mobility kit, wheels for machine movement **The Minimax CU 410E comes with a scoring blade and does not come with a main saw blade**

Technical data Min. ÷ max. edge thickness 0,4 ÷ 3 mm Min. ÷ max. edge height 10 ÷ 84 mm Min. ÷ max. panel height 8 ÷ 80 mm Min. panels length/width 290/50 mm Min. internal radius (concave), 0,4 mm thickness 25 mm Min. external radius (convex), 0,4 mm thickness 5 mm Feed speeds 3 - 4 - 5 - 6 - 7 - 8 m/min

Versatile and compact universal combined machine with the more advanced technological solutions for precision, reliability and safety. Entry-level machine for cabinet work. 3.4hp motors, 2-speed shaper, 3-knife Tersa cutterhead. 12″ sawblade with independently adjustable scoring and 5.5′ sliding table allows user to crosscut 4×8 panels square and efficiently. – Three independent 3.4 Horsepower motors, single-phase 230v – Independently adjusted scoring system – 5.5ft sliding table on precision ball bearings with outrigger and swing-arm – Micro-adjustable shaper fence – Miter fence and eccentric hold-down clamp – Three-knife “Tersa” quick-change cutterhead – Jointer tables open towards the machine, and away from operator – Mobility kit, wheels for machine movement

Minimax ME 25 Single Sided Edgebander - Control panel on machine infeed side - Machine frame made of high rigidity ribbed steel to guarantee an excellent support for the operating units - Top thick steel pressure beam with rubber coated wheels - Exclusive feed belt system - Manual adjustment of top beam with automatic positioning of the operating units to the selected panel thickness - Numeric indicator of the selected panel thickness - Wood strip loading device - Glue smoke-specific exhaust outlet; centralized extraction of the other dusts - Panel support roller which can be extended on the entire length of the machine - Safety enclosure - Electrical cabinet with PLC, padlockable main switch and overload protection - Emergency push buttons - Scraping unit (cutter radius 3mm) - Buffing unit (two independent motors – 2,800 rpm) - Adjustable infeed fence with numeric readout - Automatic lowering of the glue pot temperature after temporary non-usage

With gluing of the panel edge, also with edging solid wood strips up to 5 mm thickness, offers the “very best” performance in edge banders at this level. The features, coupled to its ease-of-use, makes it the perfect edge bander for small woodworking, furniture and panel processing companies. Technical Data • Work table dimensions mm 3000 x 525 • Min. ÷ max. thickness of rolled edges mm 0,4 ÷ 3 • Max. thickness of edges in strips mm 5 • Min. ÷ max. panel height mm 8 ÷ 50 • Min. panel length/width mm 190/110 • Min. panel length/width with end cutting/rounding unit mm 120/110 • Feed speed

High productivity edge bander with high quality performance. me 40, further enhanced compared to the previous version, with the new rounding unit that allows to obtain high quality finished products, without further processing, allowing a considerable saving of time and increasing ease of processing. Technical Data • Work table dimensions mm 3465 x 710 • Min. ÷ max. thickness of rolled edges mm 0,4 ÷ 3 • Max. thickness of edges in strips mm 5 • Min. ÷ max. panel height mm 8 ÷ 50 • Min. panel length/width mm 190/110 Feed speed m/min 9

Technical data profiset 40 Min./max. working width (finished section) 23/180 mm Min./max. working height (finished section) 6/105 mm Feed speed 6 – 12 m/min Spindles speed 6000 rpm

Technical data profiset 60 Min./max. working width (finished section) 25 (15 opt.)/230 mm Min./max. working height (finished section) 6/120 mm Feed speed – m/min Feed speed (variable with inverter) 25-May m/min Spindles speed 6000 rpm Axial adjustment of spindles with respect to the worktable 40 mm

Our longest selling bandsaw, the S 45N set the bar high for quality bandsaws. This machine has 18” cast iron flywheels, and a large cast-iron table. With 12” resaw height it is also versatile to do either pattern work, or resawing operations! This machine has been a reliable tool in the Minimax lineup for over 30 years.

The precise, cost-effective and compact circular saw with tilting blade for the D.I.Y. woodworkers and small joineries. This entry-level sliding table saw, the Minimax SC 2C is a proven design based on years of experience. It is perfect for customers upgrading to their first slider from a table saw. The footprint is small, but the capacity is large. A compact chassis, powerful 3.4hp motor, and 5.5′ sliding table. A great step up from the standard American-style cabinet saw. – 5.5ft Sliding table saw with 12″ main blade – 3.4 Horsepower single-phase motor – Anodized aluminum sliding table with hardened steel ways – Micro-adjustable rip fence with cam-locking system – Telescopic crosscut fence with two flip stops – Dedicated scoring assembly independently adjustable – Eccentric workpiece clamp – External scoring adjustments – Adjustable and removable riving knife – Outfeed table extension – Outrigger support – Tool set and operator’s manual 1-phase, 3.4hp, 5.5′ sliding stroke, tilting 12″ main blade, belt driven scoring blade, 50″ rip capacity

The prefect entry-level production machine for small cabinet shops or serious hobbyists. Affordable, without compromising quality. Solid cast iron saw unit with double trunnions and independently adjustable scoring unit. Our brand new sliding table saw, the Elite series has proven itself in American cabinet shops for many years. This machine boasts a full 8.5’ stroke and features normally found on much more expensive machines, for a fraction of the cost. See for yourself why the Minimax SC 4E 8.5 foot machine stands in a class of its own. – Solid cast iron saw unit with double support trunnions – Aluminum sliding table and rail with hardened steel guide-ways – European-style rip fence with cam lock, micro-adjustable – Automatic self-braking motor – Round steel guide bar for rip fence – Double trunnions on both saw and shaper assemblies – Telescoping crosscut fence with two adjustable flip stops – An additional table on the sliding table for support of panels with large dimensions – Eccentric panel clamp – 2-position sliding table lock – Table extension on saw out-feed – Scoring blade (adjusted independently of main blade) – ¾” DADO capability – Toolset and operator’s manual – “CSA” rated electrical components

The ideal 10.5ft single-phase sliding table saw for small cabinet shops or serious hobbyists. Affordable, without compromising quality. Maximum precision and stability with the blades lifting by means of “dove-tail” guides system and the saw unit tilting by means of two, large, lateral trunnions. The Minimax SI 315ES has proven itself in American cabinet shops for many years. This machine boasts a full 10.5’ stroke, single-phase motor and features normally found on much more expensive machines, for a fraction of the cost. STANDARD FEATURES – Double-hung cast iron trunnion – 4.8Hp single-phase motor – Aluminum table and rail with hardened steel guideways – Two aluminum flip-stops on the crosscut fence – European rip fence with cam-lock, micro-adjustable – Telescoping crosscut fence with two adjustable flip stops – Automatic self-braking motor – Eccentric panel clamp – Telescoping miter gauge with fence and support panel – 2-Position sliding table lock – Dial indicator for saw blade tilt angle – Metric and standard rule on the crosscut fence – Table extension on saw out-feed – External scoring adjustments – 3/4” dado capacity – Telescoping support arm for crosscut support table – Toolset & operator’s manual – “CSA”-rated electrical component - 10.5' Slider - 12" tilting blade - 50" rip capacity - Independent scoring unit